I Bought Fusible Web Instead of Fusible Interfacing—Is It the Same?

NSC Question

I was out of fusible interfacing and purchased fusible web by mistake. I figured they were similar. When I went to sew my pieces, even though the web was between two pieces of fabric, it entirely coated the needle and jammed my bobbin several times. Can fusible web not be sewn at all, or was I doing something wrong?

NSC Answer

Fusible web can definitely be sewn through, and usually doesn’t cause any issues with gumming up the needle. I would however recommend that after fusing it in place you let the fabric cool completely before stitching, as this will ensure that the glue is dry and set before you stitch it.

If you are interested in learning more about fusible web and other adhesives, check out this free video:

Hope this helps!
Ashley

You might also be interested in, Using Fusible Interfacing to Make Patterns Last Longer.

Do you have a sewing question you’d like answered by an expert? Email your question to editor@nationalsewingcircle.com or reach out to us on Facebook.

Please note: questions may be edited for clarity and relevance.

10 Sewing Tips from the Experts
Reply to Rita F Pursley
  • (will not be published)

41 Responses to “I Bought Fusible Web Instead of Fusible Interfacing—Is It the Same?”

  1. Virginia Goodison

    Trying to sew a dinner jacket for my husband and I don’t understand the directions! Is there a video?

    Reply
    • Customer Service

      Hi Virginia, What pattern are you using? And what steps of the directions are you having trouble with? If you’d like to provide more details, I can try to help!
      In the meantime, this video is a sew-along for a specific pattern (Simplicity 8962 by Mimi G Style), so while your pattern might be different, this video takes you through all the steps of constructing a jacket, and might help answer some of your questions.
      https://www.youtube.com/watch?v=sKdWD2sUUHg

      Best,
      Nicki
      National Sewing Circle

      Reply
  2. Aggie

    Will I need a walking foot to sew faux leather? Is there another way as that is the only time I would use it

    Reply
    • Customer Service

      Hi Aggie. Great question! The ‘Ask an Expert’ section is currently for members of our online community. By becoming a member, you will have access to our expert’s knowledge. With your membership you will also receive discounts on products and hundreds of hours of Premium content.

      If you are interested in becoming a member, please click on the offer below:
      https://go.nationalsewingcircle.com/C35032
      Sarah
      National Sewing Circle Video Membership

      Reply
  3. designdreamer

    ARE YOU KIDDING ME? YES there is a fusible web that can, and WILL gum up your needle! I can’t believe you (EXPERTS!) wouldn’t know that.

    Reply
    • Customer Service

      Hello,

      Thank you for your feedback. I have forwarded your comment to the proper department. We value your opinion, and it will help with the development of our online streaming community. We will continue to listen and work hard for your complete satisfaction.

      Sincerely,
      Sarah
      National Sewing Circle Video Membership

      Reply
    • Customer Service

      Hi Rose. Silks and satin fabrics are great for this. You can also make them out of cotton knit fabric if you are looking for something that has more stretch to it, like a sports bra.
      Ashley
      National Sewing Circle

      Reply
  4. JOSEPHINE CONER

    Can someone direct me to a video/”how to” of how to attach decorative trims to clothing items? I purchased some velvety, thin trim that is not something that I would not want include in a seam to attach.

    Reply
  5. Beverly A See

    I have trouble with a side winder for bobbin winder winding uneven.
    This is my second bobbin winder
    The first one was per f ect for 8 eight years. Im wondering if they aren’t made as well?

    Reply
    • Customer Service

      Great question! The ‘Ask an Expert’ section is currently for members of our online community. I would be happy to send your question off to the experts. To get started, please send the email associated with your paid membership account. Thanks!

      Reply
  6. Jennifer L.

    What is a good stabilizer for T-shirts to be made into a quilt? And what kind of batting is recommended for it? Thanks.

    Reply
    • Customer Service

      Hello Jennifer,

      Thank you for contacting us.

      A medium weight, fusible stabilizer is a great option for t-shirts! And you can use either a cotton or cotton/polyester blend batting.

      If you have any other concerns, please contact us at 1-855-208-7187, or chat with us on our site.

      We greatly appreciate your business!

      Sincerely,

      Lindsay
      National Sewing Circle Video Membership

      Reply
    • Customer Service

      Hello Paula,

      Thank you for contacting us.

      Many sewing machines are great for sewing knit fabrics. Rather than the machine, what helps with sewing knit garments is ensuring that you are using stretch, jersey or ball point needles, stabilizing the seams when needed and constructing using a stretch stitch.

      If you have any other concerns, please contact us at 1-855-208-7187, or chat with us on our site.

      We greatly appreciate your business!

      Sincerely,

      Lindsay
      National Sewing Circle Video Membership

      Reply
    • Customer Service

      Hello Kris,

      Thank you for contacting us.

      There are many great brands of spray adhesive. Heat and Bond brand is the one being used in this video.

      If you have any other concerns, please contact us at 1-855-208-7187, or chat with us on our site.

      We greatly appreciate your business!

      Sincerely,

      Lindsay
      National Sewing Circle Video Membership

      Reply
    • Customer Service

      Hello Helen,

      Thank you for contacting us.

      Your information has been updated. I have removed your email address from our E-Newsletter mailing list. Please allow up to 1 to 2 business days for your request to be completed. We continue to add new content to our site, so even if you are no longer receiving our E-Newsletter, you are welcome to check us out at:www.nationalsewingcircle.com.

      Please contact us at 1-855-208-7187if you would like to receive our E-Newsletter in the future, or chat with us on our site.

      Sincerely,

      Joan
      National Sewing Circle Video Membership

      Reply
  7. Thaddea Pantaleano

    I asked about how to make a large bow and you sent me to scrunches. That isn’t what I want. A big bow for someone’s head

    Reply
  8. Rita F Pursley

    I’m using a material that has glued on shiney aluminum… it’s gumming up my needle an messing with the bobbin causing jamming problems. What can I do to complete my project.

    Reply
    • Customer Service

      Hello Rita,

      Thank you for contacting us.

      Recently, I discovered a solution: use a titanium coated embroidery needle in the machine. The titanium coating on the needle keeps the needle cooler so the glue doesn’t stick to the needle. Also, an embroidery needle has a rounded point so if you back stitch onto a thread you don’t pierce a previous stitch.

      Use a needle, knife, or other pointed instrument to dig or scrape away any remaining gummed dirt or lint in the feed dog, around the bobbin case, and in other areas. Check the lower tension of the bobbin case and the upper thread tension discs. Pull a thread under the tension of the bobbin to remove dirt.

      Sincerely,

      Joan
      National Sewing Circle Video Membership

      Reply
  9. Robert Shaffer

    I am looking at three sewing machines and wonder if anyone would be able to help me decide. All three are the top in each brand. Janome, bernina, and pfaff are the three brands. Help!

    Reply
    • Joni dukes

      I don’t know about those 3 machines. I have a Viking (used every day for over 25 years) and absolutely love it. I’ve made everything from drapes, bedspreads, christening gowns, beautiful smocked clothing, quilts, just name it and I would not trade my machine for any other!

      Reply
      • Jeanne Pickrel

        They are all great machines. My choice would depend on the support available from the service center.

        Reply
    • Terry

      Ive owned bernina as my favorite machine for more than 20 years, however, i recently had a need for a wider throat area, and test drove the Janome m7 and bought it…. And LOVE it, it doesn’t do embroidery, but neither do I….. I purchased it in Dec. 2020 and have sewn on it almost daily until now….. the cost is much less than bernina and it is a wonderful feeling, and sews beautifully, handles a variety of thread weights……. My bernina is now my back up machine.

      Reply
    • Judith Huheey

      I have a Janome Memory Craft 3000 that I purchased in the year 2000. 22 years ago! and I still love the machine. I can’t vouch for the current models, but mine has been a gem. I had a lower cost Bernina before that and it was so bad I literally just finally busted the thing up and pitched it.

      Reply
    • Patricia Bukowy

      Bernini is great! I had a pfaff (expensive) and wasn’t able to use it through even one project. Ugh!!!!

      Reply
  10. Bonnie Milam

    I am new to sewing garments and working on Kwik Sew pattern K3870. Having trouble with the attaching the sleeve to the bodice. The pattern does not state to do the ease stitch, but I have more fabric on my sleeve at the upper curves. Do I go ahead and add the ease stitch step and then fit to my bodice or can I adjust while sewing?

    Reply
  11. Jenny Delmo

    Hi have just joined.. my 7 yo grandson picked 5 different purple materials for his quilt. He wants a star in the middle with Irish chain around it.. can you help with a pattern? Many thanks

    Reply
  12. Dolores Thacker

    I have had my sewing machine for a week. A Brother, I still cannot get a good sitich, I have watched videos , read directions, etc. I is just a basic sewing machine nothing fancy.

    Reply
    • Trish

      I have 2 brothers and have discovered after many hours of frustration that you MUST thread exactly as the directions say NO short cuts. Make sure your pressure foot is up when threading and bring the bobbin thread out and around to cut on the base. Pull out your owner’s manual and follow every step exactly as they say. If you still have problems make sure your machine is clean of dust and fibers in the bobbin area. Believe me I have been very frustrated and even went and purchased a new one. When my Brother works I love it but there have been many times I wanted to pitch it out.

      Reply
  13. kathleen hayes

    can you cut a fitted face mask on the crossgrain of 100% cotton fabric?

    Reply
  14. Lana Winter

    I wanted a fusible, not woven, that would be used in a hospital mask, but received Wonder Under which made the masks very stiff. Is there a fusible interfacing available that would be hole-proof, but not as stiff?

    Reply
    • Customer Service

      Hello Lana!

      That’s a great question and we’d love to help!

      The ‘Ask an Expert’ section is currently for members to our online community. We do have a promotional offer if you are interested. This would include access to expert advice (like this), plus discounts, hours of Premium videos, etc. Please feel free to take a look. You can message us right back with your question if you decide to become a member and you will have a response within 1-2 business days from our experts!

      Please follow the steps below to receive the annual membership at the introductory rate:

      1. Click on the email link: https://go.nationalsewingcircle.com/C21973
      2. Click on the Premium Membership offer.
      3. The Checkout page will display your Premium Membership purchase.
      4. Fill in your Billing Details and create an account password.
      5. Fill in your debit/credit card information.
      6. Finish by clicking Complete Order.

      If you have any further questions, please contact Customer Service at 1-855-208-7187 at your earliest convenience, or chat with us on our site.

      We greatly appreciate your business!

      Sincerely,

      Jessica
      National Sewing Circle Video Membership

      Reply
    • Customer Service

      Hello Devona!

      Great question! You’ll want to do a surface wash or spot wash by hand. Washing machines are not recommended.

      Thank you!

      Jessica
      National Sewing Circle Video Membership

      Reply
    • Ken Hammond

      Hi I’m getting a drawing with measurements then looking for people or a person to make about 300 pieces would someone in this group be willing to take this on can work out a price

      Reply