Knit Pencil Skirt Pattern

You will be so surprised how easy it is to sew a cute little pencil skirt with knit fabric on your serger. In this project, you will learn how to draft a pattern, add an elastic waistband, and hem your skirt. You’ll also get some tips for working with knit fabric, which can sometimes be a tricky fabric if you’re not used to it.

You’ll find that a knit skirt can be such a versatile (and comfortable!) addition to your wardrobe that you’ll want to make one in every color of the rainbow!

Related Video: How to Sew a Knit Pencil Skirt

knit pencil skirt

All seam allowances are 1⁄4″ serged edge throughout the pattern, except where noted.

Measure Skirt Length

Step 1: Measure from where you would like the skirt to rest on your hips to where you would like it to stop at the hem. I like mine right below my knees, which is 23” long for me.

Measure Hips

Step 2: Your hips are the widest part of the skirt, so measure around the widest part of your bottom! My measurement is 37”.

Make Pattern

pencil skirt 1

Step 3: Now we need to make our pattern piece for our measurements. We would like the skirt to stretch just a bit across our hips for a good fit, so we are going to cut a rectangle that is 37” wide. When we sew our seam up the back, we will LOSE about an inch, which will make the skirt 36” in circumference, and therefore, stretch a bit. This is called negative ease.

The rectangle should be 23” long, + 1” for the top waistband seam allowance, and 1” for the hem. So, the rectangle should be 37” wide and 25” long.

pencil skirt 2

We are going to cut the fabric on the fold, so let’s also cut our pattern width (the hip measurement) in half. Our pattern piece should be 18.5” wide, and 25” long. Note I wrote “Place On Fold” on the edge to remind myself!

Notice how I matched up the stripes as I folded it. If you’re using a striped fabric like me, check out this video for some pointers:

Related Video: Sewing with Stripes

Cut Out Skirt

pencil skirt 3

Step 4: Now it’s time to cut out your pattern. If this was a cotton, I would just use my iron-off pen to draw this pattern onto the fabric, but a knit is so shifty and stretchy, it is much better to pin a pattern to the fabric to keep it in place while cutting. Notice my edge is on the fold!

Sew Up Side Seam

pencil skirt 4

Step 5: Fold the rectangle in half, matching up the side seam and putting the right sides together. Pin in place. Since I have stripes here, I am doing my best to match up the stripes!

pencil skirt 5

Step 6: Test a scrap of the fabric on your serger, and make sure that it doesn’t pull or ruffle; the seam should lay nice and flat. Adjust your differential if it is ruffling or gathering.

Related Video: What is Differential?

pencil skirt 6

Step 7: Sew the side seam, making sure you always cut just a bit of the fabric off so the overlock stitch is perfect. Don’t run over the pins!

Try Skirt On

Step 8: Before you do the waistband, this is a good time to try your skirt on. It will pool around your waist area, but should fit nicely in the hips.

If it’s too big around the hips and you would like it tighter, run it through the serger again, cutting off the seam you sewed previously. Repeat this until you get a nice fit that you are happy with!

Related Video: Knit vs. Woven Fabrics

Pin Elastic to Waist

pencil skirt 7

Step 9: Measure your waist, which is the smallest part of your middle. My waist measurement is 29”. I want my skirt to sit down on my hips a bit more, so I am going to add 1” to make it a bit bigger. My elastic piece should be 30” long.

Now overlap the ends of the elastic by ½”, being careful not to twist, and zig zag back and forth across the overlap several times to join them in a loop.

pencil skirt 8

Step 10: Lay your skirt flat with the side seam on one side. Mark the other side fold with a pin.

Then lay your elastic flat, and also mark those with pins. This will be your guide to pinning the elastic to the skirt.

pencil skirt 9

Step 11: Put the elastic ring inside the skirt (on the right side of the skirt). Match one of the pins with the side seam of the skirt and pin into place. Then, match the other pin on the elastic to the pin on the skirt. This will divide the elastic evenly across the skirt waist.

pencil skirt 10

Step 12: Lay the pinned areas on top of each other, and repeat the marking process the other direction as well.

pencil skirt 11

Step 13: You now have four even quadrants of the skirt pinned in four places. The skirt will be bigger than the elastic.

Stitch Elastic to Waist

pencil skirt 12

Step 14: With the elastic underneath and the fabric on top, serge the elastic evenly to the skirt by pinching at a pin and PULLING the elastic toward you to stretch it out. Make sure and watch the fabric so you only pull the elastic enough for the fabric to lay STRAIGHT, not STRETCHED. Only the elastic should be stretching.

pencil skirt 13

Step 15: Once you get all the way around, the elastic will relax and the top of the skirt will be just a bit gathered!

Related Video: Inserting and Sewing Elastic with Ease

Topstitch Elastic

pencil skirt 14

Step 16: Now turn your skirt right side out. The elastic should now be on the OUTSIDE of the skirt. Turn the elastic back around to the INSIDE of the skirt, and pin it down that way all the way around. You will only need to pin every 5 inches or so, since we are going to stretch as we sew again.

pencil skirt 15

Step 17: The elastic around the waist is going to need to stretch, so use a zig zag stitch to keep it in place.

TIP: Remember that scrap we used to see if the serged edge was nice and flat? Do a zig zag down the middle, and then try to stretch the fabric. It WILL have a breaking point where the threads pop, but make sure you have plenty of stretch to get it over your hips, and the thread doesn’t break. Adjust by making your stitch length a little shorter, or your zig zag a little wider.

Hem Skirt

pencil skirt 16

Step 18: Now, a knit does NOT have to be finished! If you look at many maxi skirts in the store, the edge is just cut right off, and there is no seam! Because it is a knit, it will not fray! So, you COULD be done at this point. Me? I like it to look pro, so let’s hem it.

Run your hem through the serger to finish the raw edge. This also helps it from curling when you sew your final hem. Fold your hem under an inch, and pin it into place.

Related Video: How to Hem a Skirt

pencil skirt 17

Step 19: Using your zig zag again, stitch close to the fold on the front side. I like to do a second zig zag up a bit to help hold everything in place, AND I think it makes it look more professional.

Once you’ve finished your stitch, your skirt is now ready to wear and show off!

If you’d like to learn how to sew the same skirt on a conventional machine, check out this video for specific instructions: How to Sew a Knit Pencil Skirt

Happy sewing!

Have something to add? Leave a comment or email

  • (will not be published)

36 Responses to “Knit Pencil Skirt Pattern”

  1. Blanca

    Thank you for sharing! Great instructions and extra assistance in case needed🥰

  2. kamlesh sharma

    Hi , if my waist is 42″ , how long should i use elastics ,42 or less?

  3. alicestoga

    If you want a little flare on the bottom , slash about 4 evenly spaced to the bottom of the skirt and stretch out that part of the pattern a little 6-8″ high should do it depends on how much flair you want.this was hard to explain. do a sample on paper.

  4. cian5tsn

    I love to use a stretch twin needle on my knit hems/sleeves to get a ready made look. I set my zigzag to .5 to allow for adequate stretch. Also, don’t forget to use a ballpoint/stretch needle in your serger and sewing machine. These needles slip through the fibers, rather than puncture them, eliminating needle holes and potential runs through your knits. A walking foot is helpful if all stitching will be done on your sewing machine.

  5. Sue

    Ticket 19649 I enjoyed your video and wonder if this could also be used for a thicker material that is stretchy but less than the thinner knit.

    • Customer Service

      Dear Sue,

      Thank you for your patience. In regards to your question-

      Yes, it definitely can! Just remember that if your fabric is not as stretchy you might want to add in extra ease so it doesn’t fit too tight.

      National Sewing Circle Video Membership

  6. Raimonda

    The instructions are great. All was awesome till I added the elastic. After serging and topstiching it even though I did all according to the instruction the elastic remained streched almost 10cm – from 85 till 94. And now the skirt is way too big for my weist. :(

  7. Rosalie Longo

    Great easy to understand instructions! I really want to make a skirt that has a little flare to it instead of straight pencil. I’m thinking I could use these instructions and begin flaring it below the hip measurement. Does that sound doable to you? Thanks

    • alicestoga

      I tried to explain how to do the flare for your skirt. Do not add extra width to the sides as this makes the skirt an aline skirt.

      • Customer Service

        Hello Alice,
        Thank you for contacting us. Great question! The ‘Ask an Expert’ section is currently for members of our online community. By becoming a member, you will have access to our expert’s knowledge in sewing. With your membership you will also receive discounts on products and hours of Premium video content.
        If you are interested in becoming a member to National Sewing Circle, please click on the special offer below:

        If you have any further questions, please chat, email, or contact Customer Service at 1-855-208-7187.

        We greatly appreciate your business!


        National Sewing Circle Video Membership

  8. Cheryl Washington

    When sewing elastic in on my sewing machine no serger do have to change the needle ,because it was coming thru the elastic

  9. Nneka

    Thanks this is a simple and easy pattern to follow. I was wondering if I could use this to make a stretch velvet skirt for my daughter?

  10. Nora

    Started this skirt project three hours ago, after a few breaks to deal with my little one, I have completed my knit pencil skirt! No doubt to be the first of many as I thouroughly enjoyed the entire simple process! I followed the video and paused as I reached a new step, allowing me time to work on what I just saw. Exhilarating to accomplish such a pretty skirt – knit skirt I might add – in a short evening! Cheers

  11. Vivian Coleman

    I love the pattern but I would love for mine to be more contoured to my knees. And my question is to do that is it better to put a split in the back or on both sides?? And how long or deep a split is considered decent?? Thank you!

    • Customer Service

      Hello Vivian,

      This is going to come down to personal preference as well as what you find more comfortable and easier to walk in. Also, a slit up the back may look more formal/professional whereas slits on the sides can look more casual. As for how far up the slit should go, you can determine that by measuring from your waist down to where you would be comfortable with the top of the slit ending. Transfer that measurement to the skirt pattern and then cut and hem accordingly.
      Hope this helps!

      Ashley NSC Video Membership

      We’d love to have you be a part of our community. We are convinced you will enjoy the benefits of becoming a member and having access to the best instructional how to videos and professional tips. We would like to offer you a special promotion for your first year membership.

  12. Winifred

    Thank you so much i am going to give it a try…. very good details and excellent explanation!

    • Customer Service

      Hi, Yvette. You could serge the side seams and the hem of the skirt with a serger and then use a conventional machine to attach the elastic.